Navigator 2WD V8-5.4L DOHC VIN R (2001)
3. Install the fan shroud.
1. Lower the fan shroud onto the radiator clips.
2. Install the screws.
4. Install the fan blade and the fan clutch.
1. Position the fan blade assembly and the fan clutch on the water pump pulley.
2. Use Fan Clutch Holding Tool to hold the water pump pulley steady.
3. Use Fan Clutch Wrench to install the fan blade and fan clutch.
5. Connect the upper radiator hose to the radiator.
6. Install the front air deflector.
1. Position the front air deflector.
2. Install the screws.
7. Fill the engine cooling system.
8. Install the air cleaner (ACL).
