Navigator 2WD V8-5.4L DOHC VIN R (2001)
![background image](/lincoln/navigator_2wd/v8-5.4l_dohc_vin_r/Page-1544001.png)
Shifter A/T: Service and Repair
Selector Lever
Removal
1. Remove the ignition switch lock cylinder.
2. Remove the upper steering column shroud.
3. Remove the gearshift lever.
1
Disconnect the electrical connector.
2
Remove and discard the gearshift lever pin.
3
Remove the gearshift lever.
Installation
1. NOTE: The gearshift lever pin must be replaced whenever removed.
Follow the removal procedure in reverse order.