Navigator 2WD V8-5.4L SOHC VIN L (1999)
Antenna Cable: Service and Repair
REMOVAL
1. On 4x4 vehicles, remove the front wheel opening moulding.
1
Remove the pin-type retainer.
2
Remove the screws.
3
Carefully pull the wheel opening moulding to release the nine clips and remove the front wheel opening moulding.
2. Remove the inner fender splash shield.
1
Remove the screws.
2
Pull the inner fender splash shield to release the clips.
3. Disconnect the radio antenna lead-in cable from the antenna base.
4. Remove the audio unit.
