Navigator 2WD V8-5.4L SOHC VIN L (1999)
Parking Brake Cable: Service and Repair
Front Cable and Conduit
Removal
1. Remove the parking brake control.
2. Disconnect the front parking brake cable and conduit) from the RH parking brake rear cable and conduit.
3. Remove the front parking brake cable and conduit.
1. Pry the rubber seal from the front floor pan.
2. Compress the retainer and release the front parking brake cable and conduit from the bracket.
3. Remove the front parking brake cable and conduit.
Installation
1. Follow the removal procedure in reverse order.
