Navigator 2WD V8-5.4L SOHC VIN L (1999)
Axle Nut: Specifications
PROCEDURE
1. While rotating the front disc brake hub and rotor clockwise, tighten the spindle nut to 40 Nm (30 ft. lbs.).
2. Loosen the spindle nut two turns
3. Tighten the spindle nut to 23-34 Nm (17-24 ft. lbs.) while rotating the disc brake hub and rotor counterclockwise.
4. Loosen the spindle nut 175°.
5. Tighten the spindle nut to 2 Nm (17 inch lbs.) while rotating the front disc brake hub and rotor clockwise.
6. Install the nut retainer, cotter pin, and hub grease cap.
