Navigator 2WD V8-5.4L SOHC VIN L (1999)
be urethaned.
NOTE:
^
Apply with deliberate strokes, making sure not to overlap applied area.
^
Wipe off the Urethane Glass Prep immediately after application because it flash dries.
7. Cut the urethane applicator tip to specification.
8. Apply a bead of Urethane Sealant (part of EOAZ-19562-A) or equivalent meeting Ford specification WSB-M2G316-B to the pinch weld just
outside the foam butyl dam.
9. Install the inside rear view mirror.
10. Position the windshield glass.
11. Install the upper windshield weatherstrip.
12. Paddle the excess Urethane Sealant from the two sides of the windshield glass.
NOTE: Use one continuous stroke when removing the excess Urethane Sealant.
13. If necessary, remove excess Urethane Sealant from the outside surface of the windshield glass.
