Navigator 4WD V8-5.4L (2010)
-
Disconnect the electrical connector.
-
Remove the trailer lighting plug.
5. Remove the electrical connector from the trailer hitch and unclip the harness from the retainers on the frame.
6. Remove the 4 trailer hitch side mounting bolts (2 each side).
-
To install, tighten to 175 Nm (129 lb-ft).
7. Remove the 4 trailer hitch lower mounting bolts (2 each side) and remove the trailer hitch.
-
To install, tighten to 275 Nm (203 lb-ft).
8. To install, reverse the removal procedure.
