Navigator 4WD V8-5.4L DOHC VIN A (2000)
6. Disconnect the air line from the air spring.
-
Compress the quick connect locking ring and pull out the air line.
7. Disconnect the air spring solenoid electrical connector and remove the air spring.
Installation
1. Note: When installing the rear air spring, it is necessary to inflate the air suspension system.
Connect the solenoid valve electrical connector.
2. Note: When installing the air lines, make sure the white air line is fully inserted into the fitting for correct installation.
Connect the air line into the solenoid valve line fitting.
