Navigator 4WD V8-5.4L DOHC VIN R (2001)
2
Remove the center console lid.
4. Disconnect the console rear panel.
1
Remove the upper screws (vehicles without the video system).
2
Lower the cup holder.
3
Remove the four rear screws.
NOTE: Vehicles without the video system.
5. Remove the rear integrated control panel.
1
If equipped, disconnect the floor/panel control cable at the control head.
2
Disconnect the power point electrical connector.
3
If equipped, disconnect the blower motor control electrical connector.
4
Disconnect the radio control electrical connector.
5
Remove the screws.
6. Remove the rear Integrated Control Panel (ICP)
1
Disconnect the electrical connector.
2
Remove the four screws.
NOTE: Vehicles equipped with the video system.
INSTALLATION
1. To install, reverse the removal procedure.
