Navigator 4WD V8-5.4L DOHC VIN R (2001)
Rear Door Interior Handle: Service and Repair
REMOVAL
1. Remove the rear door trim panel.
2. Remove the rear door latch control remote control.
1
Disconnect the rear door latch rod.
2
Remove the screw.
3
Slide the rear door latch remote control forward and remove.
NOTE: The rear window glass must be completely raised.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Make sure the latch release rod is not preloading the latch. It should be clipped in a relaxed state with no slack.
