Navigator 4WD V8-5.4L DOHC VIN R (2001)
3
Remove the affected seat.
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS,
CAUTIONS, NOTES, AND INSTRUCTIONS IN THE REMOVAL AND INSTALLATION PROCEDURE.
2. Remove the seat cushion from the seat backrest.
3. Remove the climate control seat fan motor (if equipped).
1
Cut the zip-tie, separate and remove the duct.
2
Cut the zip-tie and separate the duct from the fan motor.
3
Disconnect the fan motor wire harness.
4
Remove the screws.
5
Remove the fan motor.
4. Remove the lower Thermo-Electric Device (TED) (if equipped).
1
Cut the zip-tie, separate and remove the duct.
2
Disconnect the lower TED electrical connector.
3
Cut the zip-tie and remove the lower TED.
4
Remove the screws and remove the lower TED mounting bracket.
5. Remove the climate control module (if equipped).
1
Disconnect the climate control module.
2
Remove the screws.
3
Remove the climate control module.
