Navigator 4WD V8-5.4L DOHC VIN R (2001)
1. Lubricate the piston boot, caliper piston, piston seal, and cylinder bores with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or
equivalent DOT 3 fluid meeting Ford specification ESA-M6C25-A.
2. Install the caliper pistons.
1
Install the piston seal.
2
Install the piston boot on the caliper piston.
3
CAUTION: Be careful not to damage or dislodge the piston seal.
Insert the caliper piston.
4
CAUTION: Be careful not to cock the caliper piston.
Press the caliper piston into the cylinder bore.
3. Install the disc brake caliper.
Brake Caliper Anchor Plate
Removal
1. Remove the pads.
2. Remove the front disc brake caliper anchor plate.
1
Remove the two front disc brake caliper anchor plate bolts.
2
Remove the front disc brake caliper anchor plate.
Installation