Navigator 4WD V8-5.4L DOHC VIN R (2001)
Control Assembly: Service and Repair
With Electronic Automatic Temperature Control
REMOVAL
1. Disconnect the battery ground cable.
2. Detach the center instrument panel finish panel.
1
Rotate the center instrument panel finish panel vents inward.
2
Through the vent openings, grasp the center instrument panel finish panel and pull outward.
3
Detach the center instrument panel finish panel.
3. Disconnect the control switch connector. Remove the center instrument panel finish panel.
4. Remove the climate control head.
1
Remove the screws.
2
Pull out the climate control head.
