Navigator 4WD V8-5.4L DOHC VIN R (2001)
2. Connect the heater inlet line (18696-C) peanut fitting.
1
Connect the inlet lines.
2
Loosely install the nut.
3. Install the heater inlet line (18696-C).
^
Starting from the rear of the vehicle, install the end with the blue tape between the frame crossmember and the floor pan.
4. Connect the heater inlet line (18696-D) to the heater inlet line (18696-C).
1
Connect the fittings.
2
Loosely install the nut.
5. Install the heater inlet line (18696-C).
1
Remove the RH rear wheel and tire.
2
Install the end with the red tape between the frame and the body.