Navigator 4WD V8-5.4L DOHC VIN R (2001)
EGR Electronic Vacuum Regulator Solenoid: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the bolts and remove the engine appearance cover (if equipped).
NOTE: The 4.6L engine is shown, the 5.4L engines are similar.
3. Remove the Exhaust Gas Recirculation (EGR) vacuum regulator solenoid.
1
Disconnect the electrical connector.
2
Disconnect the vacuum lines.
3
Remove the bolts (nuts if applicable).
INSTALLATION
1. To install, reverse the removal procedure.