Navigator 4WD V8-5.4L DOHC VIN R (2001)
21. Connect and position the driver air bag module to the steering wheel.
1
Connect the horn switch electrical connector.
2
Connect the driver air bag module electrical connector.
3
Position the driver air bag module to the steering wheel.
22. Install the two driver air bag module bolts.
23. Install the two steering wheel back cover plugs.
24. Restore the vehicle to operating condition.
1
Reactivate the supplemental restraint system (SRS). See: Air Bag(s) Arming and Disarming/Service and Repair/Air Bag Disarming and
Arming
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS,
CAUTIONS, NOTES, AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
DEACTIVATION/REACTIVATION PROCEDURE.
2
With all the restraint system diagnostic tools removed, prove out the system.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE
FROM THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE
VIOLATION OF VEHICLE SAFETY STANDARDS.
