Navigator 4WD V8-5.4L DOHC VIN R (2001)
2. Position the side crash sensor out from under the seat.
1
Pull the carpet flap out from under the outboard side of the seat to expose the side crash sensor.
2
Remove the pin-type retainer.
3
Remove the bolts.
4
Position the side crash sensor out from under the seat.
NOTE: A flap opening in the carpet, at the outboard side of the front seats already exists, for servicing the side crash sensor.
3. Remove the side crash sensor.
1
Disconnect the electrical connector.
2
Remove the side crash sensor and bracket.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
1. Connect the side impact sensor.
