Navigator 4WD V8-5.4L DOHC VIN R (2001)
8. Remove the front suspension lower arm.
1
Remove the two front suspension lower arm nuts.
2
Remove the two front suspension lower arm bolts.
3
Remove the front suspension lower arm and torsion bar as an assembly.
9. Separate the front suspension lower arm from the torsion bar.
Installation
1. Install the front suspension lower arm.
1
Attach the front suspension lower arm to the torsion bar.
2
Install the front suspension lower arm and torsion bar as an assembly.
3
Install the front suspension lower arm bolts and nuts.
2. Install the front suspension arm lower ball joint castle nut.
1
Position the front wheel knuckle.
2
Install the front suspension arm lower ball joint castle nut.
3
Install a new cotter pin.
