Navigator 4WD V8-5.4L DOHC VIN R (2001)
Level Control Solenoid Valve: Service and Repair
Solenoid Valve - Inline
Removal
NOTE: The vehicle must be positioned on a suitable lifting device prior to deflating the air suspension system.
1. Deflate the air suspension system.
2. Disconnect the battery ground cable.
3. Raise and support the vehicle.
4. NOTE: Front fill solenoid shown, front gate solenoid and rear fill solenoid similar.
Disconnect the electrical connector.
5. Disconnect the solenoid valve air lines.
^
Compress the red quick connect locking rings and pull out the air lines.
6. NOTE: Front fill solenoid shown, front gate solenoid and rear fill solenoid similar.
Remove the solenoid from the frame.
Installation
1. NOTE: When installing the air lines, make sure the white air line is fully inserted into the fitting for correct installation.
NOTE: After installing the solenoid, it is necessary to inflate the air suspension system.