Navigator 4WD V8-5.4L DOHC VIN R (2001)
Suspension Spring ( Coil / Leaf ): Service and Repair
Removal
1. Raise and support the vehicle.
2. CAUTION: Do not use heat to loosen a seized wheel nut. Heat can damage the wheel and the wheel bearings.
Remove the wheel and tire assembly.
3. Remove the driveshaft.
4. Disconnect the rear brake anti-lock sensor (ABS) electrical connector.
5. NOTE: Make sure the parking brake control is fully released.
Relieve the tension on the parking brake system.
1
Pull the front parking brake cable and conduit.
2
Insert a suitable retainer into the parking brake control.
