Navigator 4WD V8-5.4L DOHC VIN R (2001)
Install a new inline transmission fluid filter (XC3Z-7B155-BA). If the vehicle was not equipped with an inline fluid filter install a new inline
transmission fluid filter kit (XC3Z-7B155-AA) according to the instructions supplied with the kit. Carry out the transmission fluid cooler flow test
procedure to verify that there is correct fluid flow through the new inline fluid filter.
All vehicles
3. Position the air deflector and install the fasteners.
4x4 vehicles
4. Position the skid plate and install the bolts.
All vehicles
5. Lower the vehicle.
Vehicles with 4R100 transmission
Fill the transmission with the specified type and quantity of transmission fluid.
-
Use Motorcraft MERCON Multi-Purpose (ATF) Transmission Fluid XT-2-QDX or equivalent meeting MERCON specifications.
MERCON(R) automatic Transmission Fluid is being replaced by MERCON(R) V as a service fluid, as per TSB 06-14-4.
Vehicles with 4R70W transmission
6. Fill the transmission with the specified type and quantity of transmission fluid.
All vehicles
7. Check for leaks
Vehicles equipped with air suspension
