Navigator 4WD V8-5.4L DOHC VIN R (2001)
5. Install the high lift transmission jack with the special tool to the transmission.
6. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody, damage to the TSS and OSS
sensors will occur.
Remove the rear transmission mount.
1
Raise the transmission up off the rear crossmember support.
2
Remove the bolts.
3
Remove the rear transmission mount.
Installation
1. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody, damage to the TSS and OSS
sensors will occur.
Install the rear transmission mount.
1
Raise the transmission up off the rear crossmember support.
2
Install the rear transmission mount.
3
Install the bolts.