Navigator 4WD V8-5.4L DOHC VIN R (2001)
16. Remove the nut and bolt.
^
Repeat for the other side.
17. Remove the nut and bolt and position the rear suspension arm and bushing out of the way.
^
Repeat for the other side.
18. Remove the nut and bolt retaining the shock absorber to the axle.
^
Repeat for the other side.
19. Disconnect the vent hose.
20. CAUTION: Carry out this step with an assistant to keep the axle clear of obstructions while raising the vehicle.
Raise the vehicle until clear of the rear axle.