Navigator 4WD V8-5.4L DOHC VIN R (2001)
17. Remove the nut and bolt retaining the rear suspension upper front arm and bushing to the axle.
^
Repeat for the other side.
18. Remove the nut and bolt and position the rear suspension arm and bushing out of the way.
^
Repeat for the other side.
19. Remove the nut and bolt retaining the shock absorber to the axle.
^
Repeat for the other side.
20. Disconnect the vent hose.
21. CAUTION: Watch for obstructions.
Lower the jack until the rear axle clears the vehicle.