Navigator 4WD V8-5.4L DOHC VIN R (2001)
6. Install the bolt and nut retaining the shock absorber to the axle.
^
Repeat for the other side.
7. CAUTION: The rear axle must rest on the jack stands to keep the vehicle as close to ride height as possible.
Tighten the bolt.
^
Repeat for the other side.
8. Tighten the bolt.
^
Repeat for the other side.
9. Raise the vehicle.
10. Position the rear axle tracking bar in the bracket and install the bolt. Tighten the bolt to specification.
