Navigator 4WD V8-5.4L DOHC VIN R (2001)
17. Using the special tools, recheck the backlash.
^
If backlash is within the specification, refer to Backlash within specification. If backlash is not within the specification, repeat Backlash not
within specification.
^
The specification shown is the full allowable range.
Backlash within specification
18. Remove the bolts and the bearing caps.
19. To establish differential bearing preload, increase both left and right differential bearing shim sizes by the specification shown. Use the special tool
to fully seat the differential bearing shims. Make sure the assembly rotates freely.
20. Install the bearing caps and the bolts.
21. Using the special tools, recheck the backlash.
