Navigator 4WD V8-5.4L DOHC VIN R (2001)
7. NOTE: Apply only a light oil film on the pinion bearings before assembling the tool.
Assemble and position the following in the differential housing.
8. NOTE: This step duplicates final pinion bearing preload.
Tighten the special tool to the specification shown.
9. CAUTION: Offset the special tool to obtain an accurate reading.
Rotate the special tool several half-turns to make sure the pinion bearings seat correctly and position the special tool as shown.
10. Install the special tool.
1
Position the special tool.
2
Install the bearing caps.
3
Install the bolts.