Navigator 4WD V8-5.4L DOHC VIN R (2001)
2. CAUTION: Do not damage the wheel bearing oil seal.
Install the axle shaft.
3. CAUTION: Do not damage the rubber O-ring in the axle shaft groove.
Install the U-washer.
1
Position the U-washer on the button end of the axle shaft.
2
Pull the axle shaft outward.
4. NOTE: If a new differential pinion shaft lock bolt is unavailable, coat the threads with Threadlock and Sealer EOAZ-19554-AA or equivalent
meeting Ford specification WSK-M2G35 1-A5 prior to installation.
Install the differential pinion shaft.
1
Align the hole in the differential pinion shaft with the case lock bolt hole.
2
Install a new differential pinion shaft lock bolt.
5. Install the differential housing cover, and fill the differential housing with the correct amount of specified lubricant.
6. Install the brake disc, and the brake caliper.
7. Install the wheel and tire assembly.
8. NOTE: If equipped with air suspension, reactivate the system.
Lower the vehicle.