Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Body / Frame Mount Bushing: Service and Repair
Body Support - Number 4
BODY SUPPORT - NUMBER 4
Removal and Installation
WARNING: If equipped with air suspension, the electrical power to the air suspension system must be shut down prior to hoisting, jacking or
towing an air suspension equipped vehicle. This can be accomplished by turning off the air suspension switch located at the left rear interior of
the vehicle. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during
these operations.
NOTE: Left side shown, right side similar.
1. Remove the liftgate scuff plate.
2. Remove the body mount bolt cover.
3. Remove the body mount nut.
4. Loosen the remaining body mount bolts.
