Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Trim Panel: Service and Repair
B-Pillar Trim Panel
B-PILLAR TRIM PANEL
Removal and Installation
NOTE: Left side shown, right side similar.
Upper and lower
1. NOTE:
-
Position the safety belt guide to the lowest position.
-
Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or cover does not remain closed,
install a new shoulder safety belt guide cover.
Remove the safety belt guide.
-
Lift up on the cover and remove the nut.
2. Remove the upper B-pillar trim panel.
-
Remove the bolt cover and bolt.
-
Remove the upper B-pillar trim panel by pulling outward to release the clips.
Lower
3. Remove the front and rear door scuff plates.
4. Position the lower B-pillar trim panel aside.