Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
9. Install the front seat back lumbar adjuster.
1
Install the front seat back lumbar adjuster.
2
Install the two screws.
Vehicles with manual seat
10. Install the manual seat track.
Vehicles with power seats
11. Install the power seat tracks.
12. Install the power seat motors.
All vehicles
13. Install the seat cushion foam pad.
14. Install the seat cushion cover.
15. Attach the J-clips (six shown).
16. Install the J-clips on the pivot covers (inboard shown, outboard similar).
17. Install the side shield.
18. Install the 40 percent seat and repower the SRS.
Front Seat Cushion - 60 Percent
FRONT SEAT CUSHION - 60 PERCENT
Disassembly
WARNING:
-
The safety belt pretensioner is a pyrotechnic device. Always wear safety glasses when repairing an air bag equipped vehicle and when
handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical connector. Doing so
