Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
4. Release the J-clips.
5. Remove the frame from the seat cushion foam.
6. CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip, or the hook and loop strip can be torn
from the seat cushion foam.
Remove the cushion trim cover from the foam pad.
7. To assemble, reverse the disassembly procedure.
Rear Seat Cushion - Third Row, 60 Percent
REAR SEAT CUSHION - THIRD ROW, 60 PERCENT
Disassembly and Assembly
1. Remove the third row 60 percent seat backrest.
2. Remove the nut from the slide bracket on both sides of the seat cushion.
3. Remove the bolts from seat riser to cushion.
