Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Remove the seat backrest foam pad from the TED and remove the seat backrest foam pad.
10. Route the seat backrest TED wire harness back through the seat cushion and trim cover.
11. Remove the seat backrest TED.
1
Remove the seat backrest TED wire harness pin-type retainers.
2
Cut the zip-ties and separate the ducts from the seat backrest TED.
3
Remove the seat backrest TED.
Installation
1. Install the seat backrest TED.
1
Install the seat backrest TED.
2
Install the seat backrest TED to the ducts and install the zip-ties.
3
Attach the pin-type retainer for the seat backrest TED wire harness.
