lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Seat Track - Power|Page 10074 > < Seat Track - Power|Page 10072
Page 1
background image

Seat Track: Service and Repair
Seat Track - Manual

SEAT TRACK - MANUAL

Removal

WARNING:

-

The safety belt pretensioner is a pyrotechnic device. Always wear safety glasses when repairing an air bag equipped vehicle and when
handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical connector. Doing so
could result in pretensioner or air bag deployment and could result in personal injury.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:

-

If a seat equipped with a seat mounted side air bag and/or a safety belt pretensioner (if equipped) system is being serviced, the supplemental
restraint system (SRS) must be depowered.

-

The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate
a supplemental restraint system (SRS) fault.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

1. NOTE:  60 percent seat shown, the 40 percent seat similar.

Remove the affected seat and depower the SRS.

2. Remove recliner handle cover.

3. Remove the recliner handle screw and remove handle.

Seat Track - Power|Page 10074 > < Seat Track - Power|Page 10072