Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Parking Brake Release Switch: Service and Repair
Removal and Installation
Column shift (Expedition only)
1. NOTE: The parking brake release switch is located on the steering column. It is serviced as an assembly with the brake shift interlock.
Remove the brake shift interlock park brake release switch assembly.
Floor shift
2. Remove the floor shift selector lever.
3. Remove the screws, disconnect the electrical connector and remove the switch.
All vehicles
4. To install, reverse the removal procedure.
^
Make sure the switch is correctly aligned with the extension on the shifter before installing the screws.
