Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
6. Starting from the rear of the vehicle, install the first three line brackets.
7. Tighten the middle auxiliary heater line fittings.
8. Inspect the auxiliary heater lines for correct installation. Loosen, reposition and tighten as needed.
9. Install the heat shield and the bolts.
10. Install the heat shield and the bolts.
11. Install the RH catalytic converter.
12. Install the muffler.
13. Partially lower the vehicle.
14. Install the heat shield bolt.
