Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
1. NOTE: If the valve cover is not secured within 4 minutes, the sealant must be removed and the sealing area cleaned with metal surface cleaner.
Failure to follow this procedure can cause future oil leakage.
Apply a bead of silicone gasket and sealant in two places where the engine front cover meets the cylinder head.
2. Position the LH valve cover and new gasket on the cylinder head and tighten the bolts in the sequence shown.
^
Tighten to 10 Nm (89 inch lbs.).
3. Using new O-ring seals, connect the A/C tube spring lock couplings.
^
Discard the O-ring seals.