Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Oil Filter Adapter: Service and Repair
Oil Filter Adapter
Material
Material
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the engine cooling system.
3. Disconnect the engine oil pressure (EOP) sensor electrical connector.
4. Disconnect the lower radiator hose from the oil filter adapter and position it aside.
5. Disconnect the degas bottle hose from the oil filter adapter and position it aside.
6. Remove and discard the engine oil filter.
7. Remove the 4 bolts and the oil filter adapter.