Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
19. Remove the retaining clip from the RH timing chain tensioner.
20. As a post-check, verify correct alignment of all timing marks.
21. Install the crankshaft sensor ring on the crankshaft.
22. NOTICE: If the components are to be reinstalled, they must be installed into their original locations. Failure to follow these instructions may
result in engine damage.
NOTE: Do not allow the valve keepers to fall off the valve or the valve may drop into the cylinder. If a valave drops into the cylinder, the cylinder
head must be removed.
