Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
^
To install, tighten to 175 Nm (129 ft. lbs.).
7. CAUTION: Only use hand tools when loosening the RH engine mount nut or damage to the engine mount can occur.
Loosen the RH engine mount nut.
^
To install, tighten to 175 Nm (129 ft. lbs.).
8. Remove the 4 exhaust manifold-to-catalytic converter nuts.
^
To install, tighten to 40 Nm (30 ft. lbs.).
9. CAUTION: Only use hand tools when removing the transmission mount-to-crossmember nuts or damage to the transmission mount can occur.
Loosen the 2 transmission mount-to-crossmember nuts.
^
To install, tighten to 103 Nm (76 ft. lbs.).
