Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Heat Shield: Service and Repair
Exhaust Heat Shields
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Inspect the exhaust system for loose or missing heat shields or foreign material trapped between the heat shields and the exhaust system
components.
3. If any heat shields are loose, install worm gear clamps.
^
Use one of the following clamps: FOTZ-5A231-A or W705949-S300.
^
Trim off the excess ear of the worm clamp.
4. If the heat shields are missing, install new heat shields or exhaust system components as necessary.
5. Lower the vehicle.
