Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Air Door Actuator / Motor: Service and Repair
Vacuum Control Motor
Air Inlet Door
VACUUM CONTROL MOTOR - AIR INLET DOOR
Removal and Installation
1. Remove the instrument panel. Refer to: Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Removal and
Installation, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Installation
2. Disconnect the vacuum connector.
3. Remove the screws and the air inlet door vacuum control motor.
4. To install, reverse the removal procedure.
Floor/Defrost Door
VACUUM CONTROL MOTOR - FLOOR/DEFROST DOOR
Removal and Installation
1. Remove the bolts and position aside the accelerator pedal.
