Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Electronic Brake Control Module: Service and Repair
Anti-Lock Brake System (ABS) Module
Removal and Installation
NOTE: When installing a new module, it must be calibrated and configured (either by download/upload or uploading the as-built data method).
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Disconnect the battery.
2. Disconnect the ABS module electrical connector.
3. Remove the 3 bolts and the ABS module.
4. To install, reverse the removal procedure