Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
been exposed, install a new safety canopy module. Do not attempt to repair the safety canopy. Failure to follow these instructions could result
in personal injury in the event of a safety canopy deployment.
-
Never put any type of fastener or tie strap around any part of the safety canopy module or interior trim panel. This will prevent the safety
canopy module from deploying correctly. Failure to do so can result in personal injury in the event of a safety canopy module deployment.
With the safety canopy module positioned in the vehicle as shown, angle the rear of the safety canopy module to the sheet metal, so that the
deployment canister can be inserted into the sheet metal opening.
2. Position the safety canopy and engage the front hook to the roofline sheet metal.
3. Install the screw at the roofline near the A-pillar.
4. Install the two screws at the front ramp.
