Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
RCM is connected and the ignition switch is ON. Failure to follow these instructions may result in the inadvertent deployment of the safety canopy
and risk of personal injury.
Separate the RCM from the bracket.
1
Remove the nuts.
2
Separate the RCM from the bracket.
All vehicles
6. Disconnect the small restraints control module (RCM) electrical connector.
1
Push down to release the retaining tab.
2
While releasing the retaining tab, pull out and disconnect the small RCM electrical connector.
7. Disconnect the large RCM electrical connector.
1
Pinch the thumb tab and pivot the connector position assurance lever away from the RCM, disengaging the lever.
2
Pull out and disconnect the large RCM electrical connector.
Vehicles with 60/40 front bench seat
8. Remove the RCM.
Vehicles with a center console
9. Remove the RCM.
1
Remove the RCM bracket bolts.
2
Remove the RCM with bracket.
Installation
