Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
1. Make sure the second row side impact sensor tabs are aligned to the bracket.
2. Install the second row side impact sensor with bracket.
1
Align and insert the second row side impact sensor bracket locator pin to the opening in the quarter panel sheet metal.
2
Install the bolt.
3
Connect the electrical connector.
3. NOTE: Make sure the safety belt webbing is not twisted prior to installation.
Install the rear quarter trim panel.
1
Align the rear quarter trim panel and push in, seating the retaining clips.
2
Install the safety belt anchor.
4. Install the rear door scuff plate.
5. Repower the system.
6. Check the active restraint system for correct operation.