Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Seat Belt Buckle: Service and Repair
Rear Safety Belt Buckle - Second Row, 40 Percent Seat
REAR SAFETY BELT BUCKLE - SECOND ROW, 40 PERCENT SEAT
Torx Bit, Safety Belt Bolt
Special Tool(s)
Removal and Installation
WARNING: All safety belt assemblies including retractors, buckles, front seat belt buckle support assemblies (slide bar), shoulder belt height
adjusters (if so equipped) child safety seat tether attachments and attaching hardware should be inspected after any collision. All belt
assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate correctly. Belt assemblies not in
use during a collision should also be inspected and replaced if either damage or incorrect operation is noted.
NOTE: The LH side 40 percent seat is shown, the RH side is similar.
1. Pivot the 40 percent seat up.
2. Remove the seat side shield.
1
Remove the two screws.
2
Slide up and remove the side shield.
3. Remove the screws and the lower pedestal cover.
