Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
18. Pinch and release the seat belt retractor guide from the seat backrest frame and remove the safety belt retractor.
19. NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten all nuts and bolts to specification.
To install, reverse the removal procedure.
1
When installing the safety belt retractor, make sure to engage the anti-rotation tab to the sheet metal.
2
Remove the shipping clip after safety belt retractor installation.
20. Check the active restraint system for correct operation.