Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
8. NOTE: The head restraint sleeve pins are not interchangeable, note location for installation.
Reach up into seat backrest, squeeze, release, and remove the head restraint sleeves.
9. CAUTION: Use care when separating the seat backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the seat backrest foam.
Invert the seat backrest trim cover and remove.
10. Remove the seat backrest foam pad.
11. Remove the four screws from the seat belt cover (two shown).
12. Remove the safety belt retractor bolt.
13. Pinch to release the seat belt guide and remove the seat belt assembly.
