Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
7. Remove the 2 nuts and remove the battery cable harness from the 2 support bracket studs.
8. Remove the starter motor solenoid terminal cover.
9. Disconnect the starter motor connections.
1
Remove the nut and disconnect the starter motor battery ground cable.
2. Remove the nut and disconnect the starter solenoid cable.
3. Remove the nut and disconnect the starter motor positive cable.
10. Remove the negative battery cable to frame bolt.
11. Remove the battery cable harness.
12. To install, reverse the removal procedure.